tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:18:15 GMT -7
was looking back and I noticed I have not posted anything.... nothing.... so, here is one that is sitting on my bench. hope to have it done by the end of the year. it started out to be a build of a fellow I met on a facebook page. he has a pink pro street 71 duster, but the more I work on it, the more its drifting into my own build instead of a copy of his car, oh well. here is where I start all my projects... at the chassis. Attachment DeletedAttachment DeletedAttachment Deleted |
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:21:10 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:23:48 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:26:39 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:30:40 GMT -7
ahhh, forget the bondo, lets move to the front end... don't know why they cant make these front ends all one piece. I will have to fill in the frame. want to make some new a frames, that wont happen... Attachment DeletedOK, lets go back to the body. gotta stretch them rear wheel wells. make a template to make sure the size id the same on both sides. Attachment DeletedAttachment Deleted |
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:36:21 GMT -7
now that there are 3 or 4 things in progress, lets start a few more. the duster kit comes with the radiator all molded in one piece. going to use an aluminum radiator, so have to remove the stock one... Attachment Deletedhey, got a hood that need some bondo…. Attachment DeletedOK, hmmm, that hood needs to cover something... my friends car runs a very stout 340, so, instead of a hemi, I am going to keep the 340... Attachment Deleted |
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:41:05 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:44:18 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:48:10 GMT -7
finally sanded the hood... Attachment Deletedsince its a 'glass hood, cant have the steel stampings underneath Attachment Deletedok, here is an early mockup, (before the trimming of the wells, I don't think I have even done that yet! man, I have to stop jumping around.) Attachment Deleted |
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:51:49 GMT -7
the more they told me not to do it, the more I had to do it. have to open up that trunk on a pro street car!! not much to work with cept that little rear window molding... please don't break.... YES!!! Attachment Deletedadding some strength... Attachment DeletedOK, back to the interior, lets finish off that tunnel.. Attachment Deleted |
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 22, 2018 8:57:50 GMT -7
|
|
|
|
Post by Grandpabeast on Oct 24, 2018 17:34:17 GMT -7
Looking great my friend, nailed the stance
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 25, 2018 6:20:57 GMT -7
Looking great my friend, nailed the stance thanks, Beast. I actually am going to drop the front just a tweek more. |
|
|
|
Post by sharp on Oct 25, 2018 15:02:41 GMT -7
This is looking great Al.Very nice work on the floor pan and chassis.
|
|
