Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 6, 2016 10:01:59 GMT -7
The interior looks great.
What did you use for carpeting material?
Rob
|
|
|
|
Post by gardnerpag44 on Mar 6, 2016 10:54:31 GMT -7
Very nice Dale that interior is totally cool , as is the engine , some awesome work  |
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 6, 2016 16:30:40 GMT -7
Dale, my man, this is ply mind blowing. That motor is so cool looking. And the interior, freakin awesome man!!! two-thumbs-up-smiley-emoticon This box of bits you keep talking of. it sure must be huge!!! The Bits Box Rocks!!! One question though, is that correct travel for the tire thread? Almost think the tires should be switched? But then, I think I have seen tread go this direction.... Confused I am... smiley-confused005 Thank you mate, but don't panic, the wheels are just sitting there to give an idea, I will sort the treads out in final assembly.  And that box of bits, IS big, the amount of models I have pulled apart over the years just for the engine or wheels, there is a lot of bits left over...
Midnight, I will take that advice mate, thanks, sometimes it takes more than one set of eyes to pick out the little things.
Rob, the flooring is just felt from my local craft/material shop, better than flocking in some applications , can get it I about 50 different colors too.
|
|
|
|
Post by jmccann630 on Mar 7, 2016 9:46:36 GMT -7
Very nice job on the interior DC, it looks great!
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 10, 2016 13:20:31 GMT -7
A few steps forward, and a big one backwards, but, the show must go on..... I wanted a thermo fan, as there is no room for an engine fan, BUT, i didn't have one big enough, so i modified this.   Then i finally got the intercooler plumbed up,3 nights trying to work it out, BUT, it would not fit inside the grill, so 3 minutes it was gone..... will now run the turbo's with out the intercooler.  And now for the good news, i put the rear end together last night, pretty happy, just need to do some coil over shocks for it now. ( yes Tom. the tyres are back to front again, but not glued on yet mate)  |
|
|
|
Post by CoyoteCrunch on Mar 10, 2016 13:47:45 GMT -7
Glad you mentioned that bit about the tires, I was worried I would have to ask again!
phew-smiley-emoticon
Man oh man - this is one wild build, so many details, AWESOME!!!!
two-thumbs-up-smiley-emoticon |
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Mar 11, 2016 5:27:17 GMT -7
if you really wanna run that intercooler, could you popped it under the chassis somewhere? maybe run 2 separate intercoolers, one on each side? it will still look great without it.
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 11, 2016 18:36:26 GMT -7
You're doing a great job DeeCee.
Your detailing is top notch.
|
|
|
|
Post by CoyoteCrunch on Mar 12, 2016 6:52:17 GMT -7
You're doing a great job DeeCee. Your detailing is top notch. That's right, DeeCee details EVERYTHING! In fact, DeeCee's builds are not just Top Notch, but they are........ Bottom Notched,Side Notched, Front Notched, Rear Notched, Notched in Thought, just all around Notchy!!!! Sounds like Naughty!!! running-around-smiley-emoticon |
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 12, 2016 16:21:46 GMT -7
Thanks guys, and Tom, you should not drink too much while on the computer mate...   Well, apart from the intercooler, everything else is sitting and lining up just nicely. ( Tubbs, i thought about relocating the inter's, but no room under neath either mate. ). Here is the stance, with interior fitted.   And got the color combo sorted, when i went into the spray room, i still had no clue which color was going on the top.......   |
|
|
|
Post by stitchdup on Mar 12, 2016 16:26:45 GMT -7
Sweet paint job
|
|
|
|
Post by CoyoteCrunch on Mar 12, 2016 18:56:01 GMT -7
Nice color choices. That stance has quite the EVIL feel to it!! I Like It!!
|
|
|
|
Post by midnightprowler on Mar 13, 2016 5:44:46 GMT -7
hand-clapping-smiley-emoticon
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 13, 2016 7:14:12 GMT -7
SUPERB! This should've gone to the NNL this weekend!
|
|
|
|
Post by jkflash on Mar 13, 2016 7:22:55 GMT -7
Looking great deecee! Color combo is awesome
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 13, 2016 15:19:45 GMT -7
Thanks very much guys, and Joel, that would be a great week-end i reckon.... only if...... smileyCACETROO_zps365bb43e Well, i spent last night foiling it, it makes a big difference i think.    |
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 13, 2016 17:42:00 GMT -7
Looked great before BMF. Looks better now!
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 13, 2016 19:00:07 GMT -7
Oh man!
Your paint and foiling look fantastic DeeCee!
|
|
|
|
Post by Grandpabeast on Mar 14, 2016 6:17:09 GMT -7
Looking good and getting close to being done !!
|
|
|
|
Post by CoyoteCrunch on Mar 14, 2016 6:17:48 GMT -7
Wowzers - the BMF Master!! The foil really made this beauty pop!!
cant-believe-my-eyes-smiley-emoticon Awesome!! |
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 14, 2016 19:56:51 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Mar 15, 2016 6:21:17 GMT -7
nice all the way around DeeCee. taking modeling to another level. intercooler, we don't need no stinking intercooler.
|
|
|
|
Post by jmccann630 on Mar 15, 2016 8:18:27 GMT -7
Body looks great DC! Cool color combo, and nice bmf work!
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 15, 2016 14:37:31 GMT -7
Thanks guys, I will let this sit for a week or so, and get stuck into my MOTM build and catch up a bit..
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 15, 2016 14:37:39 GMT -7
Super Color Combo -- Foil / O U T S T A N D I N G two-thumbs-up-smiley-emoticon two-thumbs-up-smiley-emoticon
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 16, 2016 1:28:26 GMT -7
Thank you mate, , now here is the hood lining i made from felt, and the final teaser shot before final assembly and finished pics.   |
|
|
|
Post by CoyoteCrunch on Mar 16, 2016 5:21:53 GMT -7
Hell Yeah Man!!!! cant-believe-my-eyes-smiley-emoticon
Wicked Tight - Awesome Cool - Super Sweet Ass Build!!! jaw-dropping-smiley-emoticon
You are definitely making me itch to start lowering builds!!!
two-thumbs-up-smiley-emoticon |
|
|
|
Post by midnightprowler on Mar 16, 2016 16:49:29 GMT -7
Looking great. Not a criticism, just a note FYI, there is no chrome trim around the edge of the roof. Looks stunning sir.
|
|
Deleted
Registered: Nov 27, 2024 13:19:19 GMT -7
Posts: 0
|
Post by Deleted on Mar 16, 2016 18:01:42 GMT -7
Looking great. Not a criticism, just a note FYI, there is no chrome trim around the edge of the roof. Looks stunning sir. Thanks men, midnight, I googled a few images and could not find any chrome around the gutter edge, but I thought it would look good there to break up the gold, as nothing else is stock anyway . I appreciate you input though. I fixed that gear knob too.. |
|
|
|
Post by Grandpabeast on Mar 17, 2016 10:05:59 GMT -7
looks simple awesome !!!
|
|
