'41 Willys Street Rod

Big D
Fully Devoted Member

Registered: Sept 27, 2014 20:51:04 GMT -7

Posts: 3,202

'41 Willys Street Rod Nov 17, 2015 1:56:27 GMT -7

Quote

Post by Big D on Nov 17, 2015 1:56:27 GMT -7

I have a good number of Willys kits but this is the first one I have built. Dale talked so much about how good this kit was I just had to get one and he is right it is very nice. No flash and very few light mold lines and nice detail. I don't have much to show at this point and the pictures are as good as it gets for two o'clock in the morning shots. I have some good ideas for this build I think.
Just started the engine, got the carburetors from Iceman and they are perfect for this engine. Still have wiring and all to do to it. The color on this is Dark Cherry Pearl Lacquer and I really like it. It will look better to you when I take better pictures. I put three coats on the body and sanded with 2500 grit each coat. The body still has to be rubbed out but the hood is rubbed out and clear coated and finished.

"There will always be another model to build."

"Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Deleted Registered: Nov 24, 2024 18:14:54 GMT -7 Posts: 0	'41 Willys Street Rod Nov 17, 2015 2:21:27 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Nov 17, 2015 2:21:27 GMT -7 Engine is coming along nicely mate, and that hood looks sweet as !!

stitchdup Fully Devoted Member Registered: Nov 3, 2014 17:39:48 GMT -7 custommodelsociety.com Posts: 3,413	'41 Willys Street Rod Nov 17, 2015 3:04:02 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by stitchdup on Nov 17, 2015 3:04:02 GMT -7 Nice work Dennis, really nice colour too

Deleted Registered: Nov 24, 2024 18:14:54 GMT -7 Posts: 0	'41 Willys Street Rod Nov 17, 2015 6:33:35 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Nov 17, 2015 6:33:35 GMT -7 Looking great Dennis. Your engine work, as always, looks perfect. I'm sure that body will rub out to a great shine. Keep at it!

CoyoteCrunch
Ultimate Member

Registered: Jun 8, 2014 16:46:05 GMT -7

Posts: 6,087

'41 Willys Street Rod Nov 17, 2015 8:54:49 GMT -7

Quote

Post by CoyoteCrunch on Nov 17, 2015 8:54:49 GMT -7

Dennis, oh man, here we go again. I literally get the heebee geebee shivers watching your engine builds!! FREAKIN AWESOME!!!

Really liking that paint job too....

popcorn-and-drink-smiley-emoticon popcorn-and-drink-smiley-emoticon

"An imagination that has been flooded with beer over the years and now has no control on what amount of BS flows through it"

tubbs Loyal Member Registered: Jul 24, 2013 5:02:43 GMT -7 Posts: 1,017	'41 Willys Street Rod Nov 17, 2015 9:42:28 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tubbs on Nov 17, 2015 9:42:28 GMT -7 beautiful. I too love this kit. great parts kit also. got a few myself. your engine is great, paint too. will be watching.
	Have a great day, Tubbs

Deleted Registered: Nov 24, 2024 18:14:54 GMT -7 Posts: 0	'41 Willys Street Rod Nov 18, 2015 9:44:56 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Nov 18, 2015 9:44:56 GMT -7 Never built a Willys before but yours is outstanding.

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Nov 18, 2015 12:05:06 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Nov 18, 2015 12:05:06 GMT -7 Thanks guys. I hope to get more done today if I can get the girls to settle down and leave me alone. {Really cool to be able to say that at my age!!} two-thumbs-up-smiley-emoticon
	Last Edit: Nov 18, 2015 12:06:46 GMT -7 by Big D "There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

62pyro Full Member Registered: Oct 18, 2013 18:02:45 GMT -7 Posts: 165	'41 Willys Street Rod Nov 18, 2015 17:39:36 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by 62pyro on Nov 18, 2015 17:39:36 GMT -7 Great start. Really like that color.

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Nov 19, 2015 12:09:24 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Nov 19, 2015 12:09:24 GMT -7 Thanks Pyro. This is the first time I have used this color and I really like it.
	"There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Big D
Fully Devoted Member

Registered: Sept 27, 2014 20:51:04 GMT -7

Posts: 3,202

'41 Willys Street Rod Nov 22, 2015 13:59:09 GMT -7

Quote

Post by Big D on Nov 22, 2015 13:59:09 GMT -7

Here is the finished engine except the exhaust which I will put on later. It came out pretty well I think. The plug wires aren't green like they look. They're really a blue green teal like color. Darker and look good I think. I wish the true color had come out in the pictures. But Alas!! The color is called Peacock.

Last Edit: Nov 22, 2015 14:03:53 GMT -7 by Big D

"There will always be another model to build."

"Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

sharp Fully Devoted Member Registered: Aug 27, 2014 19:45:38 GMT -7 Mike Posts: 4,884	'41 Willys Street Rod Nov 22, 2015 14:21:50 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by sharp on Nov 22, 2015 14:21:50 GMT -7 Nice job Den,I like that color and the engine detail looks great!

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Nov 22, 2015 14:54:53 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Nov 22, 2015 14:54:53 GMT -7 Thank you sir. I am glad you like it. Since my sister-in-law moved in now it's me and two women and it gets hard to concentrate sometimes. Especially when they start working their jaws.
	"There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

CoyoteCrunch Ultimate Member Registered: Jun 8, 2014 16:46:05 GMT -7 Posts: 6,087	'41 Willys Street Rod Nov 22, 2015 14:59:38 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by CoyoteCrunch on Nov 22, 2015 14:59:38 GMT -7 jaw-dropping-smiley-emoticon Holy Guacamole!!! That's beautiful work Dennis! Right down to the pulley bolts, man oh man, I learn something new every build you do!
	"An imagination that has been flooded with beer over the years and now has no control on what amount of BS flows through it"

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Nov 22, 2015 22:21:20 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Nov 22, 2015 22:21:20 GMT -7 Thanks Tom. I think I could have done better on it, but that's just me. Darn perfectionist. A lot of times I try to make it Just a Little Bit Better and screw it up.
	"There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Deleted Registered: Nov 24, 2024 18:14:54 GMT -7 Posts: 0	'41 Willys Street Rod Nov 23, 2015 0:20:21 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Nov 23, 2015 0:20:21 GMT -7 A superb looking engine there Dennis, it will look awesome in that engine bay mate. No more detail needed i think, it is as close to perfect as you could hope for.

Big D
Fully Devoted Member

Registered: Sept 27, 2014 20:51:04 GMT -7

Posts: 3,202

'41 Willys Street Rod Nov 27, 2015 19:32:30 GMT -7

Quote

Post by Big D on Nov 27, 2015 19:32:30 GMT -7

I'm doing some detailing and all so a lot of parts are drying but I wanted to post something. This is some of what is dry and ready to go. I added PE stereo with speakers on the console and PE air conditioning with vents on the dash. Glassed in the gauges and wire wrapped the rear shocks. I've been waiting for the right build to use the flame floor mats and this is the one. I really like them. I was able to detail the little tiny nuts around the steering wheel center. Hard to do without messing it up but I dood it.

"There will always be another model to build."

"Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

CoyoteCrunch Ultimate Member Registered: Jun 8, 2014 16:46:05 GMT -7 Posts: 6,087	'41 Willys Street Rod Nov 27, 2015 21:03:07 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by CoyoteCrunch on Nov 27, 2015 21:03:07 GMT -7 Nice work Dennis!! The mats are really cool, and glass the dash gauges??? How in the world??? Thats a real awesome touch!!
	"An imagination that has been flooded with beer over the years and now has no control on what amount of BS flows through it"

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Nov 27, 2015 21:15:04 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Nov 27, 2015 21:15:04 GMT -7 Here is the finished interior. I like he way this turned out. I think it is the best interior job I have done. I don't know about yous guys but I'd ride in the sucker.
	Last Edit: Nov 27, 2015 21:16:16 GMT -7 by Big D "There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Big D
Fully Devoted Member

Registered: Sept 27, 2014 20:51:04 GMT -7

Posts: 3,202

'41 Willys Street Rod Nov 27, 2015 21:20:45 GMT -7

Quote

Post by Big D on Nov 27, 2015 21:20:45 GMT -7

Nov 27, 2015 21:03:07 GMT -7 CoyoteCrunch said:

Nice work Dennis!! The mats are really cool, and glass the dash gauges??? How in the world??? Thats a real awesome touch!!

Tom I use a simple method to give the gauges a "glassed in" look. I mix five minute epoxy and use a knife blade or exacto and dip up some epoxy and let it run on to the gauge. You may have to just touch the gauge with the tip of the blade to get the epoxy to flow onto the gauge. Set the dash level and when it dries you get the glass look, as you can see. Try it you will like it.

"There will always be another model to build."

"Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

sharp Fully Devoted Member Registered: Aug 27, 2014 19:45:38 GMT -7 Mike Posts: 4,884	'41 Willys Street Rod Nov 27, 2015 21:21:37 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by sharp on Nov 27, 2015 21:21:37 GMT -7 Very nice job on the detailing Den, I like the mats too,the dash detail is awesome!!!looking great so far bud!!!

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Nov 27, 2015 21:54:24 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Nov 27, 2015 21:54:24 GMT -7 Thank you Mike. Means a lot coming from you. I was pleased with the way it turned out.
	"There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Deleted

Registered: Nov 24, 2024 18:14:54 GMT -7

Posts: 0

'41 Willys Street Rod Nov 28, 2015 0:34:19 GMT -7

Quote

Post by Deleted on Nov 28, 2015 0:34:19 GMT -7

"I don't know about yous guys but I'd ride in the sucker."

I CALL SHOTGUN!!!!!!
That is a beautiful interior Dennis, love all the details you have thrown at it, ans nice touch on the shockies too mate,
this is going to be one KILLER ride mate.

CoyoteCrunch Ultimate Member Registered: Jun 8, 2014 16:46:05 GMT -7 Posts: 6,087	'41 Willys Street Rod Nov 28, 2015 7:15:36 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by CoyoteCrunch on Nov 28, 2015 7:15:36 GMT -7 Yes Sir!! I agree with everyone - this interior is AWESOME!!!! cant-believe-my-eyes-smiley-emoticon two-thumbs-up-smiley-emoticon
	"An imagination that has been flooded with beer over the years and now has no control on what amount of BS flows through it"

Big D
Fully Devoted Member

Registered: Sept 27, 2014 20:51:04 GMT -7

Posts: 3,202

'41 Willys Street Rod Dec 2, 2015 0:00:20 GMT -7

Quote

Post by Big D on Dec 2, 2015 0:00:20 GMT -7

Here is the frame with the engine and wheels mounted and finished. You can't see them here but the wire wrapped shocks look pretty good installed. My wife got a kick out of the oil filters. Did a little detailing to the wheels. I thought the body paint came out well. I'll set up for much better pictures when I take the finished shots. The body on the frame shot is without the interior in, it won't sit this way finished. Getting close to finishing this one.

"There will always be another model to build."

"Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Deleted Registered: Nov 24, 2024 18:14:54 GMT -7 Posts: 0	'41 Willys Street Rod Dec 2, 2015 3:51:09 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Dec 2, 2015 3:51:09 GMT -7 That is looking VERY SWEET there Dennis. As you can see now, why i love this kit, it details up very nicely, and looks awesome when together.

Deleted Registered: Nov 24, 2024 18:14:54 GMT -7 Posts: 0	'41 Willys Street Rod Dec 2, 2015 7:51:22 GMT -7 via Tapatalk Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Dec 2, 2015 7:51:22 GMT -7 Very nice! I really like it.

62pyro Full Member Registered: Oct 18, 2013 18:02:45 GMT -7 Posts: 165	'41 Willys Street Rod Dec 2, 2015 9:31:21 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by 62pyro on Dec 2, 2015 9:31:21 GMT -7 Looking good. two-thumbs-up-smiley-emoticon

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Dec 2, 2015 11:25:44 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Dec 2, 2015 11:25:44 GMT -7 Thanks Iceman. Dale was right, this is a sweet kit to build.
	"There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Big D Fully Devoted Member Registered: Sept 27, 2014 20:51:04 GMT -7 Posts: 3,202	'41 Willys Street Rod Dec 2, 2015 11:26:48 GMT -7 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Big D on Dec 2, 2015 11:26:48 GMT -7 Thank you Pyro. I do appreciate it.
	"There will always be another model to build." "Be What You Is And Not What You Ain't, Cause If you Ain't What You Is, Then You Is What You Ain't."

Post by Big D on Nov 17, 2015 1:56:27 GMT -7

Post by Deleted on Nov 17, 2015 2:21:27 GMT -7

Post by stitchdup on Nov 17, 2015 3:04:02 GMT -7

Post by Deleted on Nov 17, 2015 6:33:35 GMT -7

Post by CoyoteCrunch on Nov 17, 2015 8:54:49 GMT -7

Post by tubbs on Nov 17, 2015 9:42:28 GMT -7

Post by Deleted on Nov 18, 2015 9:44:56 GMT -7

Post by Big D on Nov 18, 2015 12:05:06 GMT -7

Post by 62pyro on Nov 18, 2015 17:39:36 GMT -7

Post by Big D on Nov 19, 2015 12:09:24 GMT -7

Post by Big D on Nov 22, 2015 13:59:09 GMT -7

Post by sharp on Nov 22, 2015 14:21:50 GMT -7

Post by Big D on Nov 22, 2015 14:54:53 GMT -7

Post by CoyoteCrunch on Nov 22, 2015 14:59:38 GMT -7

Post by Big D on Nov 22, 2015 22:21:20 GMT -7

Post by Deleted on Nov 23, 2015 0:20:21 GMT -7

Post by Big D on Nov 27, 2015 19:32:30 GMT -7

Post by CoyoteCrunch on Nov 27, 2015 21:03:07 GMT -7

Post by Big D on Nov 27, 2015 21:15:04 GMT -7

Post by Big D on Nov 27, 2015 21:20:45 GMT -7

Post by sharp on Nov 27, 2015 21:21:37 GMT -7

Post by Big D on Nov 27, 2015 21:54:24 GMT -7

Post by Deleted on Nov 28, 2015 0:34:19 GMT -7

Post by CoyoteCrunch on Nov 28, 2015 7:15:36 GMT -7

Post by Big D on Dec 2, 2015 0:00:20 GMT -7

Post by Deleted on Dec 2, 2015 3:51:09 GMT -7

Post by Deleted on Dec 2, 2015 7:51:22 GMT -7

Post by 62pyro on Dec 2, 2015 9:31:21 GMT -7

Post by Big D on Dec 2, 2015 11:25:44 GMT -7

Post by Big D on Dec 2, 2015 11:26:48 GMT -7

Shoutbox