Couple of Dodge pickups in mockup mode.

First one is a Little Red Express chassis, interior, and cab. The springs, and shocks are from a glue bomb Monster truck. The axles are from a Revell Chevy pickup with snow plow kit. The weheels, and hubs are from the same Chevy truck kit. The tires are from Paul, (got to use them at last buddy) and the setup is much more street friendly.

I had to file, sand, and shape to get the springs to fit right. Cut and filed down the riser blocks about halfway down from the Monster truck height to bring the truck down to earth. I did use the quad shocks on all four corners but cut them down to two on each corner as when put on with all four on each corner it was a bit overkill. Cut the shocks off on the outsides, cut the shocks in half, drilled out the larger side and put the smaller side into the larger and sized them to fit the spring and axle height. I also mounted the shocks outside the axles instead of inside because the more narrow axles used made mounting them inside not possible.