Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 20, 2014 17:35:24 GMT -7
thank you Paul  John, that sounds like a great idea! not feasible at this time due to lack of materials and funding for materials  |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 20, 2014 18:29:14 GMT -7
IF I knew the size of the gauges in that dash, I could make them, BUT that also depends on how soon you need/want them! BUT, would make that nice polished "rim" for the gauge, you would have to add your own lens and then a decal behind it.....
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 20, 2014 18:40:05 GMT -7
this build isn't due til april John. i'm gonna try the foil idea first, but if i decide to go route i will surely let you know amigo |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 20, 2014 22:39:04 GMT -7
two-thumbs-up-smiley-emoticon
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 0:44:55 GMT -7
well guys, i tried Dale's idea for the chrome bezels and i'm very pleased with the results! many thanks Dale high-five-smiley-emoticon  enjoy  |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 1:34:13 GMT -7
So Frank, let me get this straight....
You take the bare "dash".. leave it alone, BMF over the thing, and then paint it....
WHEN the paint is dry, you take and remove ONLY the paint around the areas? With a Q-tip wetted NOT soaked in thinner, or am I missing what you have done here?
impatient-smiley-emoticon
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 1:58:32 GMT -7
That sounds about spot on young John, and great job Frank, it looks superb mate..................your very welcome....... |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 2:06:06 GMT -7
yup! what Dale said except i used a toothpick. thank you Dale |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 11:11:01 GMT -7
That is fantastic! Great job! Love it!
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 11:30:16 GMT -7
thank you Mark gauge decals are next |
|
|
|
Post by Big D on Dec 21, 2014 13:16:47 GMT -7
WOW!!! That dash looks really good. I just learned a trick and a really good one too! Thanks Dale and Frank. You take the paint off the BMF while it is still wet, is that right?
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 21, 2014 13:36:28 GMT -7
i waited til it was dry Dennis.
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 28, 2014 19:15:01 GMT -7
|
|
|
|
Post by stitchdup on Dec 28, 2014 19:59:49 GMT -7
I've had a few of that set. If you need parts I have a pile of parts I dont need. Mostly engine and interior parts like beds and tvs for truck sleepers. possibly a cb too
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 28, 2014 20:44:19 GMT -7
a cb might be kool  i thought that was standard issue with rig kits smiley-confused005 now that i think about it, i should have a cb around here too thinking-hard-smiley-emoticon |
|
|
|
Post by sharp on Dec 28, 2014 20:59:22 GMT -7
That's coming out great Frank,nice job on the dash too! two-thumbs-up-smiley-emoticon
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 28, 2014 21:20:34 GMT -7
thank you Mike |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 29, 2014 8:58:42 GMT -7
Frank I'd KILL to get the decals to that set LMAO I see a couple that could be turned in to funnies on a models side or in a window LMAO NICE! smileyCA9464IN_zpsd9ee499f
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 29, 2014 9:30:03 GMT -7
unfortunately they are not mine to give  whatever i dont use from this accessory kit goes back to Mark. perhaps you could pm him about it, he's a member here. |
|
|
|
Post by Big D on Dec 29, 2014 12:07:48 GMT -7
There's some really nice stuff in that set. Italeri makes nice models and model products IMO.
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 29, 2014 12:35:01 GMT -7
|
|
|
|
Post by Big D on Dec 29, 2014 12:50:41 GMT -7
Dave's a fine looking fella', he'll be a hit at the truck stops!
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 29, 2014 12:57:25 GMT -7
thanks Dennis just realized my feb MOTM is in the background  |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 29, 2014 13:06:32 GMT -7
|
|
|
|
Post by Big D on Dec 29, 2014 13:55:22 GMT -7
Thanks Frank. That's an amazing site. I never knew anything like that existed. Lot of things I can use and they have so many different items. I like those scroll work decals. I bookmarked it.
Don't worry about your MOTM build in the background. I won't say anything. road-rage-smiley-emoticon
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Dec 29, 2014 14:52:15 GMT -7
that's what i thought too the Smokey and the Bandit rig set(first movie) really caught my eye |
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Mar 1, 2015 8:33:21 GMT -7
|
|
|
|
Post by stitchdup on Mar 1, 2015 9:41:16 GMT -7
Coming along nicely Frank
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Mar 1, 2015 10:48:00 GMT -7
This is a beautiful build , and a GREAT TRIBUTE to a friend. NICE WORK!! two-thumbs-up-smiley-emoticon Rick
|
|
Deleted
Registered: Nov 27, 2024 17:06:41 GMT -7
Posts: 0
|
Post by Deleted on Mar 1, 2015 11:25:52 GMT -7
many thanks guys |
|
i thought that was standard issue with rig kits smiley-confused005 now that i think about it, i should have a cb around here too thinking-hard-smiley-emoticon
whatever i dont use from this accessory kit goes back to Mark. perhaps you could pm him about it, he's a member here.
so without further ado, here's the latest...
