|
Post by kpnuts on Nov 13, 2021 14:18:12 GMT -7
|
|
|
Post by kpnuts on Nov 14, 2021 10:56:29 GMT -7
|
|
|
Post by Grandpabeast on Nov 15, 2021 13:50:23 GMT -7
looking great as always !!
|
|
41chevy
Senior Member
Registered: Jul 1, 2021 9:46:43 GMT -7
Posts: 705
|
Post by 41chevy on Nov 16, 2021 13:35:41 GMT -7
Bit more done to this started adding a bit of detail to the engine (I don't know much about these engines and can't find many useful pics of throttle linkages and such) Those air filters are just placed there. This is the main colour I've gone for. Here are pics of the Dual Quad 427 / 428 set up I restoring. The last two pics are the Shellby Performance intake with stock carbs. The carbs factory are mounted with the choke- primary's to the rear. The linkage crosses between the carbs to the right side. I see your carbs need to rotate 90 degrees. Paul
|
|
|
Post by kpnuts on Nov 16, 2021 14:52:53 GMT -7
Thats the trouble with the instructions they are mounted as the instructions say.
|
|
41chevy
Senior Member
Registered: Jul 1, 2021 9:46:43 GMT -7
Posts: 705
|
Post by 41chevy on Nov 16, 2021 20:35:15 GMT -7
Thats the trouble with the instructions they are mounted as the instructions say. The carb linkage for the way yours are set up. Paul
|
|
|
Post by kpnuts on Nov 18, 2021 14:53:04 GMT -7
Thanks for that
|
|
|
Post by kpnuts on Nov 20, 2021 7:54:48 GMT -7
|
|
41chevy
Senior Member
Registered: Jul 1, 2021 9:46:43 GMT -7
Posts: 705
|
Post by 41chevy on Nov 20, 2021 10:55:17 GMT -7
Very nice fade work. Paul
|
|
|
Post by kpnuts on Dec 1, 2021 12:54:34 GMT -7
Spent ages trying to get this decal to settle down, in the end I decided to remove it, and the reason it wouldn't settle down became apparent, never seen that happen before and no idea why.
|
|
malcox477
Loyal Member
Registered: May 21, 2019 16:19:37 GMT -7
Posts: 1,039
|
Post by malcox477 on Dec 6, 2021 22:38:08 GMT -7
WAW that's bad
|
|
|
Post by kpnuts on Dec 28, 2021 13:52:41 GMT -7
|
|
|
Post by kpnuts on Jan 9, 2022 13:17:18 GMT -7
Hi all more work on the Cobra. I decided to ditch the carbs (too much wrong with them ) The kit comes with fuel injection as an option I thought I would go with that, tbh a don't know which is worse, still I'm stuck with it now, hopefully I can improve on what the kit supplied (still won't be anything like accurate but maybe look interesting.
|
|
|
Post by kpnuts on Jan 16, 2022 13:49:57 GMT -7
|
|
|
Post by kpnuts on Jan 20, 2022 14:07:37 GMT -7
|
|
malcox477
Loyal Member
Registered: May 21, 2019 16:19:37 GMT -7
Posts: 1,039
|
Post by malcox477 on Jan 24, 2022 21:50:16 GMT -7
very nice man
|
|
|
Post by kpnuts on Jun 5, 2022 11:37:09 GMT -7
|
|
|
Post by mustang1989 on Jun 6, 2022 6:39:02 GMT -7
Detailing looks great Ken!! Glad you've got this one back out on the bench.
|
|
|
Post by kpnuts on Jun 13, 2022 12:29:18 GMT -7
|
|
|
Post by kpnuts on Aug 7, 2022 8:49:16 GMT -7
|
|
|
Post by Grandpabeast on Aug 7, 2022 9:30:48 GMT -7
looks like Ive missed a few updates. your getting close to done. Great save on the strips. everything looks tight as usual with your builds. Great job
|
|
|
Post by kpnuts on Aug 21, 2022 12:02:48 GMT -7
|
|
|
Post by Grandpabeast on Aug 21, 2022 14:17:19 GMT -7
looks really good buddy. Again awesome job !
|
|
|
Post by mustang1989 on Aug 21, 2022 17:09:46 GMT -7
I think this turned-out GREAT Ken!! I really like that color fade effect at the rear of the car.
|
|
|
Post by jkflash on Aug 23, 2022 5:11:17 GMT -7
Ready to race! great work on this one.
|
|
|
Post by CoyoteCrunch on Sept 15, 2022 7:20:40 GMT -7
Nice work KP, love all the details, and that paint job is superb sir!
|
|