tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 17, 2016 12:54:38 GMT -7
is it too late for me to jump in. I have only been here years, you would think I would have this down by now. but don't fret, it will be the same scenario you guys are used to from me.... jump in, post some pictures, don't finish, move onto next unfinished build.
anyways, I have a flintstone resin 64 Plymouth that I am close to finishing.....
YAE or NAE
thank you, Tubbs
|
|
warmachine
Super Member
Registered: Jun 19, 2013 19:27:17 GMT -7
Posts: 340
|
Post by warmachine on Oct 17, 2016 13:13:06 GMT -7
do it to it man
|
|
|
Post by AK on Oct 17, 2016 18:35:01 GMT -7
Jump right in! please please please try to finish it! Ive seen so many great starts!
|
|
Deleted
Registered: May 18, 2024 7:52:23 GMT -7
Posts: 0
|
Post by Deleted on Oct 17, 2016 19:48:07 GMT -7
Go for it Al. As long as you haven't posted anything for it so it's new to us.
|
|
Deleted
Registered: May 18, 2024 7:52:23 GMT -7
Posts: 0
|
Post by Deleted on Oct 18, 2016 1:00:50 GMT -7
GO FOR IT !!!!!!!
|
|
Deleted
Registered: May 18, 2024 7:52:23 GMT -7
Posts: 0
|
Post by Deleted on Oct 18, 2016 7:51:17 GMT -7
Tubbs Tubbs Tubbs Tubbs Tubbs just my part at cheering you on.
All the way you can do it.
|
|
|
Post by CoyoteCrunch on Oct 18, 2016 9:13:11 GMT -7
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 18, 2016 10:57:48 GMT -7
you guys crack me up... also give great encouragement. I have a few on the bench right now, I know I have posted up one of them, I will have to check and see what I haven't posted. thanks guys. if you all looked like Megan Fox, I'd kiss ya.... better get a move on.....
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 19, 2016 7:16:01 GMT -7
ok, I have 12 days to turn this....
Attachment Deleted
Attachment Deleted
into this.....
Attachment Deleted
HA-HAAAAAAAAA.......
plans are ; black exterior red interior BBC from pro stock kit nitrous
body needs sanded and painted chassis is back halved already
questions to be answered; need to pick wheel/tire combo single dominator or tunnel ram lenco or auto trans
the bench is cleared off and most parts gathered
|
|
|
Post by CoyoteCrunch on Oct 19, 2016 9:13:34 GMT -7
questions to be answered; need to pick wheel/tire combo single dominator or tunnel ram lenco or auto trans
the bench is cleared off and most parts gathered need to pick wheel/tire combo - use some good old fashioned NASCAR slicks for the rear and some skinny's for the front You could paint up some NASCAR rims, black / red pretty quickly...... single dominator or tunnel ram - Use a Tunnel ram, sounds like it would be faster and easier Don't really care about this honestly, have no clue what the difference is anyways! - HAHAHA!!! lenco or auto trans - Use an Automatic, kids now a days cannot drive a stick. My truck is a stick, I call it a built in theft deterrent!!!
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 19, 2016 10:01:29 GMT -7
questions to be answered; need to pick wheel/tire combo single dominator or tunnel ram lenco or auto trans
the bench is cleared off and most parts gathered need to pick wheel/tire combo - use some good old fashioned NASCAR slicks for the rear and some skinny's for the front You could paint up some NASCAR rims, black / red pretty quickly...... single dominator or tunnel ram - Use a Tunnel ram, sounds like it would be faster and easier Don't really care about this honestly, have no clue what the difference is anyways! - HAHAHA!!! lenco or auto trans - Use an Automatic, kids now a days cannot drive a stick. My truck is a stick, I call it a built in theft deterrent!!! thanks Tom, first, the rear has already been back-halved with the 67 chevelle chassis so I can fit 2 or 3 Nascar slicks on each side.
here is a single dominator intake...
Attachment Deleted
here is dual dominators on a tunnel ram...
Attachment Deleted
and a 3rd option, split dominators...
Attachment Deleted
I can do any one of these combos.
as faar as the tranny goes, your thinking the right way, but a lenco with a notched bench seat would be sooooo cool. but I would have to modify the floor, tunnel and bench seat...... hmmmmmm... I am taking a chance by just changing out the motor. it's already there and painted. the car is set up for a 2-tone paint job. maybe I will just back the thought process down a few notches and save some of these ideas for another 55. the goal IS to complete it.
thanks for the comments and input.
|
|
|
Post by CoyoteCrunch on Oct 19, 2016 13:05:40 GMT -7
I definitely like the dual dominators on a tunnel ram - no doubt!
|
|
tubbs
Loyal Member
Registered: Jul 24, 2013 5:02:43 GMT -7
Posts: 1,017
|
Post by tubbs on Oct 31, 2016 11:26:50 GMT -7
nope, didn't make it, but I tried. hopefully will post up in WIP folder. thanks for the encouragement fellas. I will hit one sooner or later.
all the builds look great!!! way to go guys!!!
|
|
|
Post by CoyoteCrunch on Nov 1, 2016 8:47:22 GMT -7
No worries Al - I did not make it either..... I seem to go through phases, of building many, to building barely one.....
|
|