|
Pony up
Oct 3, 2016 10:55:02 GMT -7
via mobile
Post by wheaton79chris on Oct 3, 2016 10:55:02 GMT -7
|
|
|
Pony up
Oct 3, 2016 12:48:55 GMT -7
Post by Big D on Oct 3, 2016 12:48:55 GMT -7
Looks good so far Chris.
|
|
Deleted
Registered: May 19, 2024 12:59:11 GMT -7
Posts: 0
|
Pony up
Oct 3, 2016 13:39:46 GMT -7
Post by Deleted on Oct 3, 2016 13:39:46 GMT -7
That's a nice kit Chris, I've built 3 of them. The fit issues are in the pegs for the body, int and chassis cause they are too long and need to be shortened about in half, the other is the pegs for the windshield on the inside of the roof, the rear ones are off and need to be taken out the front ones are ok and will let the windshield set in at the right place and fit good. Those are the only 2 that I remember cause it's been about 3 yrs since I built them. Don't think I have a wip post on here about it but I do have pictures of the pegs to be shortened and taken off so if you want to see them just let me know and I'll post them here for you.
|
|
|
Pony up
Oct 5, 2016 12:00:17 GMT -7
via mobile
Post by wheaton79chris on Oct 5, 2016 12:00:17 GMT -7
That's a nice kit Chris, I've built 3 of them. The fit issues are in the pegs for the body, int and chassis cause they are too long and need to be shortened about in half, the other is the pegs for the windshield on the inside of the roof, the rear ones are off and need to be taken out the front ones are ok and will let the windshield set in at the right place and fit good. Those are the only 2 that I remember cause it's been about 3 yrs since I built them. Don't think I have a wip post on here about it but I do have pictures of the pegs to be shortened and taken off so if you want to see them just let me know and I'll post them here for you. Please do post them
|
|
|
Pony up
Oct 5, 2016 12:01:17 GMT -7
via mobile
Post by wheaton79chris on Oct 5, 2016 12:01:17 GMT -7
|
|
Deleted
Registered: May 19, 2024 12:59:11 GMT -7
Posts: 0
|
Pony up
Oct 5, 2016 18:57:42 GMT -7
Post by Deleted on Oct 5, 2016 18:57:42 GMT -7
Here are the roof pins and the front ( marked in red ) need to be sanded off the roof should have only the rear pins the windshield will fit right. I'm going to find the chassis pictures that I have some where but don't remember where they are right now but will post them when I do. It's an easy mod and makes the car have a better lower stance and I didn't use the screws to hold them together on final assembly either. You can see the chassis and int pegs in the pictures on the body that have been marked or shortened and I think the ones on the chassis need shortened also. I'll post them when I find them but do a mock up of the body, int and chassis and you'll see how high the stance is.
|
|