Color Me Gone Pro mod

Thanks Joe, me too...

Thanks Pete, yes I did think of the gaps on those areas, but when I try that with some styrene the door didn't open because of the shape of those door, I even had to sand a little bit the doors on the top area to make them open well, been think what else can I do

These are my go to primers since I can no longer get Plastikote primers in my area. The first is the filler primer you read about me using on my builds. It is heavy and lays down with a semi coarse finish Hence the 500 on the label. It has about a 500 grit finish to it once dry. Dry to the touch in 15 minutes and sandable in about an hour. (Unless you really lay it on heavy/ which isn't necessary with this stuff) It can also be brushed on in areas where you only need a dollop to fill a nick or scratch. You will have to let a thick dollop of this stuff dry overnight and yes it will shrink up as it dries when used in this fashion. The 1500 is the BOMB. I love this stuff use it for almost all of my final prime work befor efinal wetsand and paint. It dries with a 1500 grit finish (Smooth man...Real smooth) you don't even have to sand it if you don't want to. Lay the finish color over it and it will look great!. Of course the Tamiya fine primer. I have this in grey/white and oxide red and will use them when the finish color dictates what color primer to use or best coverage/color accuracy. They are all lacquer based and are reduced with lacquer thinner...

Hey Pete, started today to do this to the door, tomorow morning i'll sand into get  the shape of the door, hope to make the update at the same time, i'll let you know how that goes

starting to take shape, still need to fill a little bit more, to make it look smooth, hope to complete this tomorrow, here's some pics

Now that's how its done!! Nice job on that door edge Marcos!!! That's a detail too often overlooked on a build. Devils in the details my man, and looks like you have him dancing to your tune now!!!

Thanks Pete, if i wasn't for your tip i woldn't do this, thanks and i really apprecite that man for jumping in...

Man....that DOES look better and great tip Pete!!! This is looking spectacular so far Marcos!!!!

Hey Guys, here's an update, this bad boy is starting to look good, shot the first color and now waiting to wet sand this body to add the blue on it, let see how this will turn out...

Looking really good Marcos!!Cant wait to see this in two tone!!!

ok guys, I know is not like I did a lot but I'm super exited because is my first good two tone paint job, very little to touch up on this one, the beast is looking good, hope you guys like it

Thanks Pete, and thank you for the masking tip, definetly i'll try that on my next project, on this one i did use a masking type from Hobby Lobby and i thing did great, my friend help me telling me how to do a good masking but the masking tape did help me that much, and can't wai to apply some decals to this project ether man

That's Awsome Marcos!!! Some cool builds you got there. Congrats on the trophy!

Here's a little update on the beast, i love this project more and more, hope you guys like it...

So here is how i have done it, decals from the door are from my original Color me gone kit, sponsors decals are from the 58 Christine kit (Base donor kit for this project) and the front grill was custom made







This is my favorite shout for the car