|
|
Post by kpnuts on Jan 19, 2018 14:01:07 GMT -7
|
|
|
|
Post by kpnuts on Jan 20, 2018 10:45:22 GMT -7
|
|
|
|
Post by kpnuts on Jan 21, 2018 13:30:35 GMT -7
|
|
|
|
Post by kpnuts on Jan 23, 2018 13:36:29 GMT -7
|
|
|
|
Post by jkflash on Jan 24, 2018 7:41:08 GMT -7
Looking really good. That thing is MASSIVE!
|
|
|
|
Post by kpnuts on Jan 24, 2018 12:23:32 GMT -7
Well I've spent 3 hrs trying to get the wing mirrors on this, I may never touch the bl$€y kit again don't believe the YouTube video it's nigh on impossible. I've removed the windscreen to give me more room but still can't get them on, I really don't know how this is still in one piece.
|
|
|
|
Post by kpnuts on Jan 25, 2018 13:25:12 GMT -7
Hi all well after lots of suggestions from people who have completed this kit I used a combination of their suggestions to do it I took my tamiya screwdriver which came with the tamiya bike kits (didnt want to use the one that came with the kit) broke the blade off   Cut the end off a pencil and drilled it out then glued the blade in, I now have a shorter screwdriver    Now to modify the petrol tank to be removable and to detail it up. First get my hole punch select the right size  Punch selected hole through self adhesive ally foil  Add to ignition switch  The two dome headed Allen screws on the outside of the ingition switch housing are glued in. I've drilled the holes they are supposed to screw into out so they are now locating pins, I will use the inner ones to hold the tank. I've glued the ignition housing to the tank   |
|
|
|
Post by kpnuts on Jan 26, 2018 13:23:04 GMT -7
Hi all this is how near I am to finishing this    I've sanded down the centre rear tyre to take the newness off it and realised I've missed the decals off the centre hub and I've weathered it now is it too late to add them now. I'm going to alter the side panels panels to make them removable. |
|
