|
|
Post by AK on Aug 5, 2015 20:21:31 GMT -7
I'll be kit bashing a couple kits to build a pro street 69 Charger. Hope to get a few pictures posted tomorrow. 
|
|
Deleted
Registered: Nov 21, 2024 20:01:16 GMT -7
Posts: 0
|
Post by Deleted on Aug 6, 2015 2:43:10 GMT -7
COOL COOL COOL,, A pro street Mopar, can't go wrong there mate...
|
|
|
|
Post by CoyoteCrunch on Aug 6, 2015 4:57:57 GMT -7
OOOOOOOOOOOOOOOOOOO Yeah - Pro Street Charger!!!!
You have my attention sir.......... popcorn-and-drink-smiley-emoticon |
|
|
|
Post by AK on Aug 6, 2015 18:51:30 GMT -7
All the main parts will come from these two kits.  And a quick mock up!   |
|
|
|
Post by poet on Aug 7, 2015 3:48:52 GMT -7
Nice!!
|
|
|
|
Post by CoyoteCrunch on Aug 7, 2015 5:24:54 GMT -7
SUPERIOR KITS TO BASH!!!!!!
You have my attention still, and you may proceed sir......
popcorn-and-drink-smiley-emoticon |
|
|
|
Post by mike0157 on Aug 7, 2015 15:20:18 GMT -7
You keeping it as the general lee? Lol just joking but this is going to be very cool I can already tell
|
|
|
|
Post by AK on Aug 7, 2015 18:30:20 GMT -7
You keeping it as the general lee? Lol just joking but this is going to be very cool I can already tell pro Street General Lee... thinking-hard-smiley-emoticon
Sounds like a GREAT concept! 
Okay, I have this old General laying around ......here's a mock up!
I think it looks COOL as Hell! But I'll be going a differant route!
|
|
|
|
Post by gardnerpag44 on Aug 7, 2015 19:39:20 GMT -7
Looks real cool AK can't wait to see more  |
|
|
|
Post by mike0157 on Aug 7, 2015 20:48:38 GMT -7
Hmm that is freaking cool looking I have both them kits as well lol just might have to try that one.
|
|
|
|
Post by Grandpabeast on Aug 8, 2015 5:12:49 GMT -7
Looks good, how well did the frame swap go? Any issues?
|
|
|
|
Post by AK on Aug 8, 2015 18:22:46 GMT -7
Thanks everyone for the comments! As far as the fit...well the chassis went into the body with only minor trimming around the rear section of the frame (behind the rear wheels and a little off the back edge. The interior doesn't fit the chassis's huge wheel tubs at all, so I had to do a lot of trimming in this area. Also the hump in the interior and chassis didn't match very well which required me to do a lot of cutting/scraping/ sanding to mate these parts together properly. Also the roll bar in this kit never did fit very well, so I scrapped it in favor of a scratch built one made from plasti-strut tubing. I'm using the Coronet's Hemi engine, but dig through my parts box for an induction system I liked. Finally I decided on a blower with dual 4's and a huge bug catcher on top! Mated the blower belt and Alternator belts together and made them fit together well. I'll move on to the interior next!
|
|
|
|
Post by mike0157 on Aug 9, 2015 1:25:28 GMT -7
Great looking engine
|
|
|
|
Post by AK on Aug 9, 2015 5:15:42 GMT -7
Thank you Mike!
|
|
|
|
Post by CoyoteCrunch on Aug 9, 2015 5:31:55 GMT -7
Nice job on that engine! Looks Great! smileyCA9464IN_zpsd9ee499f
|
|
|
|
Post by poet on Aug 9, 2015 6:24:54 GMT -7
Nice Hemi!
|
|
|
|
Post by gardnerpag44 on Aug 9, 2015 8:22:02 GMT -7
Great looking engine , nice detail |
|
|
|
Post by AK on Aug 9, 2015 18:57:29 GMT -7
|
|
|
|
Post by sharp on Aug 9, 2015 19:13:21 GMT -7
Looks great so far AK
|
|
|
|
Post by gardnerpag44 on Aug 9, 2015 19:15:34 GMT -7
Very Cool and some great work |
|
|
|
Post by Grandpabeast on Aug 10, 2015 4:46:29 GMT -7
very awesome , love the smell of cut plastic !!
|
|
|
|
Post by CoyoteCrunch on Aug 10, 2015 8:16:12 GMT -7
Some serious awesome "Trickery" happening here - Lookin Great!!
|
|
|
|
Post by AK on Aug 10, 2015 9:52:24 GMT -7
Thanks guys! I should be able to get the rest of the exhaust on and wrap up the chassis tonight. The body has all it's colors applied so all it needs is bmf and clearcoats.
|
|
|
|
Post by AK on Aug 10, 2015 20:49:29 GMT -7
Chassis is done, body has BMF applied. I'll get a couple of coats of clear on it a day or two. then a little buffing and finishing! two-thumbs-up-smiley-emoticon  |
|
|
|
Post by gardnerpag44 on Aug 10, 2015 21:31:28 GMT -7
Looking great Alan very nice work on this |
|
|
|
Post by stitchdup on Aug 11, 2015 0:17:05 GMT -7
Nicely detailed chassis, it's going to be a nice car
|
|
|
|
Post by CoyoteCrunch on Aug 11, 2015 5:04:07 GMT -7
Very nice build AK - so you clear coat over your bmf?
|
|
|
|
Post by AK on Aug 12, 2015 19:15:09 GMT -7
Thanks Paul. It's almost done, Here's a picture with the graphics laid out in pencil. This will be the last picture before I enter the first 5 in the contestants section!  |
|
|
|
Post by sharp on Aug 12, 2015 19:47:17 GMT -7
Nice clean chassis detail,looks great Alan
|
|
|
|
Post by AK on Aug 13, 2015 3:18:06 GMT -7
Very nice build AK - so you clear coat over your bmf? [br Not always, but sometimes I do. It helps to hold small areas such as door handles and wiper arms in place. You can also clearcoat over decals. |
|
