Deleted
Registered: May 2, 2024 7:57:34 GMT -7
Posts: 0
|
Post by Deleted on Aug 30, 2015 22:10:22 GMT -7
Thanks for all the kind comments and help with the int. color guys cause it helps keep my sanity high-five-smiley-emoticon Got the other crack fixed, put a little filler on both for the low spots, going to sand and reprime that area and then get it ready for color again Here is a pict. of the white side panels for the rear seat area and the floor panel with the embossing powder, frt. lower seat and the door panels. The pockets on the door panels are going to be the same color as the seats That's it for right now, need to get the door hinges on the doors and the body, put the hinges on the hood then get them ready for primer and paint. Till next up date smiley-greet016
|
|
|
Post by Grandpabeast on Aug 31, 2015 13:23:42 GMT -7
colors are looking great, sorry to hear about the cracked plastic. Is the plastic brittle ?
|
|
Deleted
Registered: May 2, 2024 7:57:34 GMT -7
Posts: 0
|
Post by Deleted on Aug 31, 2015 16:38:58 GMT -7
GB the plastic doesn't seem to be brittle but that is the side I had a warp in and used hot water to straighten it out and may be doing it that way did some thing to the plastic on that side, the rest of it has been normal with no cracking smiley-confused005
I'm hoping every thing is OK now with out any more problem but will find out smiley-greet016
|
|
Deleted
Registered: May 2, 2024 7:57:34 GMT -7
Posts: 0
|
Post by Deleted on Sept 2, 2015 7:11:10 GMT -7
Fine job so far! I'm glad you're persevering on a relatively new release that should NOT have warping troubles. The Minicraft line I wasn't familiar with, and I remember when, a few yrs. ago they released the 2 large scale kits, your roadster and a pickup. It's great some company came out with a new lge. scale kit. Too bad their quality control was so low. Best of luck, progress looks excellent so far. Since it's interior shows, I hope you get that as nice as the rest is.
|
|
Deleted
Registered: May 2, 2024 7:57:34 GMT -7
Posts: 0
|
Post by Deleted on Sept 29, 2015 15:54:20 GMT -7
Hi gang, well I'm not going to get this done on time ( a long ways from it ) Had trouble with the house cooling system and then about a week ago had a water leak in the front yard after the meter so I had to take care of it. Found the leak after digging from the house to about 3/4 the way to the meter, wasn't showing any wet areas but the meter was moving all the time, had a fit when I got the water bill that's why I checked the meter. Got it fixed and still have to fill some of trench back up, kinda rough on me with a bad leg, right hip and left shoulder so I just do a little at a time. When I get back on this I'll start a new post and go from their. smiley-greet016
|
|
Deleted
Registered: May 2, 2024 7:57:34 GMT -7
Posts: 0
|
Post by Deleted on Sept 30, 2015 2:57:38 GMT -7
Keeping the house running , unfortunately needs doing sometimes mate, and for some silly reason, takes priority over modeling. smileyCASHS601_zps1c54a9c5
Hope you do still get it finished at some stage and show us what you ended up with.
|
|
Deleted
Registered: May 2, 2024 7:57:34 GMT -7
Posts: 0
|
Post by Deleted on Oct 2, 2015 18:46:17 GMT -7
I hope over time you get this one finished. It will be something you can be proud of!
|
|